pfSense – Enable SNMP

Last Updated: July 27th, 2022/Published On: April 19th, 2016/By /Views: 4283/
  • Click Services>SNMP
  • Click Enable in the upper right of the SNMP Daemon Section
  • Enter public under read-only community
  • snmpdaemon
  • Leave SNMP Traps disabled
  • Check all Modules
  • snmpmodules
  • Set Interface Binding to LAN
  • snmpinterfacebinding

While you’re in here:

  • Go to System>General Setup
    • Change domain to internal domain (ie, rmtechteam.local)
    • Verify timezone is set correctly
Categories: Blog, Product SpecificTags:

Table of Contents